Activity
Mon
Wed
Fri
Sun
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
What is this?
Less
More
Make it Match
365
5.0
Free
7 contributions to Make it Match
Amazing what you can find in a "retiring to Florida" Auction
Iwata LPH-400 x 2. Silver cap and orange cap, one with Devibliss pressure and one with Iwata. Keep up the hunt!
4
0
Amazing what you can find in a "retiring to Florida" Auction
3M cartridges
Hello, I’m new here and this is my first post. I am painting an airplane (homebuilt) using Axalta AF400 series paint (AF403 packaged white to be specific) and I am pretty sure it contains isocyanates. I have been using a respirator with 3M 6003 cartridges, but have read a few things recently that claim that no cartridge is really adequate for isocyanates and that a forced fresh air respirator is needed. Anyone here more expert in the PPE field than me who can comment? I have posed this question to my Axalta paint supplier, but haven’t received an answer. I suspect this may be a question they will dodge given liability concerns. I looked at the Hobby Air systems and they aren’t super expensive. Looks like I could get one with a full hood for well under 1 AMU. AMU = Aviation Monetary Unit which is $1,000. Pilots and airplane owners use AMUs as it sounds better to tell your wife that something only cost 2 AMUs rather than 2 grand. 😂
0 likes • 8d
Thanks, Matthew! Agree completely. I suppose I should have said, “If buying on Amazon, make sure you buy directly from the 3M store.” “Full price, full life…”
0 likes • 6d
@Aaron Jokela Correct, for painting supplies. And if you have to go to the paint store, just stock up on supplies while you’re at it.
Hey Everyone
I just wanted to introduce myself. I’ve been a professional automotive painter for over a decade. I’ve been spraying waterborne for the majority that time. I’ve recently switched to a shop that uses solvent and I find I’m struggling to achieve the finishes I used to get with waterborne. I’m looking to learn and maybe even help others too. I work mainly in a production environment, but I’m always striving for a perfect finish.
0 likes • 8d
Can either of you tell us your process for spraying waterborne over older solvent based finishes? I have painted cars, but most of the time I spray waterborne conversion varnish on furniture and guitars I’ve built. I’d love to use waterborne base and clear, but dont know where to start or even where/what to purchase. Thanks!
Even the best laid plans go wrong
Last week I sprayed a bunch of stuff that came off the gun looking absolutely perfect. The kind of finish that makes you stand there for a minute just staring at it. So I walked out for about 30 minutes. Came back, opened the door, looked at my panels and my stomach dropped. Fish eyes. Everywhere. All over the hood, all over everything I had just sprayed. Bad ones too, not little baby ones you can hide under a buff. If you've ever had this happen you know the feeling. Total dumpster fire. Kind of like Kevin dropping the pot of chili at the office Christmas party. That's exactly how I felt walking through that door. What I think actually happened: I'd been running a space heater near the booth to keep things warm. My best guess is somebody sprayed WD40 near it at some point, or got some on it. As the heater warmed up over the session, those silicones cooked off and drifted onto my wet clear. Fish eye city. I was running Wanda 2100 LV that day. Good clear, but it didn't stand a chance against silicone contamination floating in the air. Most guys would panic here and start sanding everything back to base. Don't do that. There's a way better route and it's called flow coating. The basic idea: let the contaminated clear fully cure, block sand it dead flat, then lay fresh clear over a perfectly flat foundation. The new clear self levels into a glass finish and you skip the cut and buff entirely. Let everything cure for two to three days. The hood was the worst panel so I started there to get the hardest one out of the way first. First pass was 600 grit. I needed the coarser paper because the clear was still a touch soft and 800 was giving me painted pigtails, those annoying little curly cues you get when sandpaper grabs soft clear. 600 cut through clean. Wiped it down with a microfiber. Degreased. Then I went back over the whole panel with 800 grit and got it sanded out properly. Looked like a matte mess at that point, which is exactly what you want. If you can still see gloss anywhere, you're not flat yet.
Even the best laid plans go wrong
0 likes • 8d
Is fisheye eliminator worth anything?
How to paint aluminum trim
This is the trim to my E30. Id like to paint it gloss black. The material is aluminum. Do I just use my regular sealer for the base I plan to use or is there something else I need to consider like a flex additive since the part will need to bend a little and be massaged into place?
How to paint aluminum trim
0 likes • 16d
OK, so a related question. Is there a way to spray clear over aluminum? How about polished aluminum wheels?
1-7 of 7
Brad Oren
2
15 points to level up
@brad-oren-7993
Retired eye surgeon and half a$$ car painter and wood finisher.

Active 4d ago
Joined Oct 31, 2026
Powered by