9h (edited) • Equipment& Load Control Issues
Case Study 57: Single-Use Strap Used to Lift Sharp Peri Shutters
Incident Overview
Sharp-edged Peri shutters were lifted using a single-use strap above a live construction site.
What Went Wrong
Incorrect lifting accessory selection.
Key Lessons Learned
- Sharp loads require edge protection
- Single-use straps are limited
- No lifting if there's no lifting accessories available
Safety Recommendations
Correct lifting accessories must be selected based on load type.
●LOLER 1998 – Regulation 4 (Strength/stability); Regulation 8 (Organisation); Regulation 9 (Inspection/TE where applicable)
●PUWER 1998 – Regulation 4 (Suitability); Regulation 5 (Maintenance of accessories where applicable)
●BS 7121-1 – Accessory selection for sharp/abrasive loads; edge protection requirements; supervision intervention
●Manufacturer guidance – Sling limitations, edge protection and prohibited uses
Wolf Lifting Dynamics Limited – Safety HUB | Case Study 57
0
0 comments
Case Study 57: Single-Use Strap Used to Lift Sharp Peri Shutters
powered by
skool.com/wolf-lifting-dynamics-9548
This community shares real lifting case studies, consultancy insights, and site-proven lessons covering cranes, supervision, planning, and execution.
Suggested communities
Powered by