Case Study 53: Forklift Used with Incorrect Chain Attachments
Incident Overview
A forklift lifted rebar mesh using chains draped directly over forks without approved attachments.
What Went Wrong
Forks were incorrectly used as lifting points.
Key Lessons Learned
- Forks are not lifting points
- Improvisation increases risk
Safety Recommendations
Forklifts must only lift loads using approved lifting attachments.
●LOLER 1998 – Regulation 4 (Stability and safe configuration); Regulation 8 (Organisation)
●PUWER 1998 – Regulation 4 (Suitability); Regulation 6 (Inspection where relevant); Regulation 9 (Training)
●BS 7121-1 – Correct selection/connection of lifting accessories; prohibition of improvised attachment methods
●Manufacturer guidance – Forklift approved lifting points/attachments only
Wolf Lifting Dynamics Limited – Safety HUB | Case Study 53
0
0 comments
Case Study 53: Forklift Used with Incorrect Chain Attachments
powered by
skool.com/wolf-lifting-dynamics-9548
This community shares real lifting case studies, consultancy insights, and site-proven lessons covering cranes, supervision, planning, and execution.
Suggested communities
Powered by