Work under the body - 2 · Make it Match

Work under the body - 2

When I reached the clean metal state I washed the whole thing with IPA before applying the primer. As a primer I used IMPA 1806 2K epoxy primer in the factory RAL1015 color. The gun was an Auarita K-400 with a 1.7 nozzle. My compressor is a 50 liter tank on which I put 6 silent compressor heads, so the total capacity is 390 liters/minute.

After the primer, the gap sealing followed with Sikaflex 529 AT in color beige, and the rubber underbody protection could come. I used SikaGard 6470 in gray as the material. I used the standard underbody protection spray gun for the application.

Finally, I sprayed the whole thing according to the factory look, according to the body color, I used the factory PPG GRS Deltron BC 1K paint for this, but the TDS allows me to add 10% PPG hardener. So, for a more stable bond, I sprayed with hardener-strengthened paint. The gun was an Auarita 989-2 with a 1.3 nozzle.

4 comments

Work under the body - 2