2d (edited) • General discussion
GHK‑Cu/SNAP-8 Topical Serum
🧪 Best GHK‑Cu/SNAP-8 Topical Concentration & DIY Serum Guide
If you’re using GHK‑Cu peptide topically, you don’t need “max strength” to get great results. In fact, the sweet spot is usually gentle and simple.
✅ What’s the ideal concentration?
For most people, the best topical GHK‑Cu strengths are:
- 0.5% – Best for beginners, sensitive skin, or cautious testing
- 1% – Best all‑around starting point (face + scalp)
- 2% – More aggressive, only if you already know you tolerate it well
- 3% – High‑end experimental level, not ideal for daily use or beginners
👉 My recommendation:Start with 0.5–1%, then only move higher if your skin/scalp is comfortable and you want to experiment.
🧴Simple formula for a 30 mL GHK‑Cu + SNAP‑8 serum
If you’re using 30 mL of hyaluronic acid serum as your base:
- 0.5% = 0.15 g GHK‑Cu
- 1% = 0.30 g GHK‑Cu
- 2% = 0.60 g GHK‑Cu
- 3% = 0.90 g GHK‑Cu
SNAP‑8 added at the same levels:
- 0.5% = 0.15 g SNAP‑8
- 1% = 0.30 g SNAP‑8
- 2% = 0.60 g SNAP‑8
- 3% = 0.90 g SNAP‑8
- Liquid Germall Plus:
- 0.5% = 0.15 g Germall Plus
➕ Step‑by‑step DIY GHK‑Cu serum (30 mL bottle)
What you’ll need
- GHK‑Cu peptide powder
- SNAP‑8 peptide powder
- Liquid Germall Plus
- 30 mL bottle of hyaluronic acid serum
- Precision scale (0.01 g resolution)
- Small clean cup or beaker
- Stir stick or small pipette
- Funnel or dropper
- Clean bottle to store the final serum
Step‑by‑step
1️⃣ Sanitize everything
Clean your hands, tools, and work area. Sterility matters with DIY peptide serums.
2️⃣ Weigh out the correct amount based on your target concentration.
For a 30 mL bottle at 3% each:
- 0.15 g → 0.5%
- 0.30 g → 1%
- 0.60 g → 2%
- 0.90 g → 3%
3️⃣ Pour out part of the serum
Remove about half of the HA serum (roughly 10–15 mL) into a clean cup so you have room to mix.
4️⃣ Add the powder & mix
Slowly sprinkle the GHK‑Cu into the serum portion and stir until fully dissolved (no visible clumps).
5️⃣ Return to bottle
Pour the mixture back into the original 30 mL bottle and combine with the remaining serum.
6️⃣ Mix thoroughly
Gently roll or invert the bottle until the solution is uniform and well blended.
7️⃣ Label clearly
Write:
- Concentration (e.g., “1% GHK‑Cu/Snap8 in HA Serum”)
- Date mixed
8️⃣ Store properly
Keep in a cool, dark place. If possible, refrigerate your DIY batch to help preserve it.
🧴 How to use it
- Frequency: Start with 1x daily or every other day if you’re new to copper peptides.
- Application: Apply to clean, dry skin or scalp, then wait 1–2 minutes before other products.
- If irritation occurs: Reduce frequency or drop down to a lower concentration (0.5% → 0.3%).
4
1 comment
GHK‑Cu/SNAP-8 Topical Serum
powered by
Suggested communities
Powered by