A couple years ago I decided to take DIY HVAC more serious when I faced some issues with my heat pump. I needed to figure out if my old system lost some charge. At that point I knew that I will need to measure pressures and line temperatures.
At first I tried to get away as cheaply as possible while still trying to get quality tools. So I placed an order for an analog Mastercool manifold. When that didn't show up after 3 week I asked the seller, and was told it will take another 2 to 3 weeks. By that time I had enough and decided to go "all out".
I canceled that order and got the 6 piece Fieldpiece probe kit including a micron gauge.
Now, many believe that you still need a manifold once you pull a vacuum, recover refrigerant or add a charge, but that is not true. With a couple hoses, core removal tools and a charging T, you are fully equipped with those probes.
Once the tools as well as vacuum and charge hose showed up, I decided to get a real HVAC tool bag.
So this small tool bag from VETA PRO PAC now has everything I need to test and log my heap pump system. I will log all the data points the Fieldpiece app spits out, every summer around the same date, and with the same outdoor temperature. This will tell me in time when it develops a small leak. I will also use my Hioki and Klein multimeter in order to log amp draw and meg the compressor's winding-resistance. This will tell me if the compressor is its way out.
A leak in a coil or the compressor going out are the 2 main issues that often force a system replacement over a repair, if the system is old. It makes little sense to replace a coil, the compressor, the air handler or the condensing unit, when the rest of the system only last another 2 years or so.
The propose of all this is, that I can detect issues in time, so I can prepare for my system replacement in winter, I can take my time to do it right, without rushing into mistakes in the heat of the summer.
Owning most tools will lower the stress when its time to get work done. I won't have to research tools and add another week or 2 to the job.
Now, I will still need a pump, and if my compressor goes out, a recovery machine and tank. There are more tools needed, but this is a good start that allows me to test, log, top-off and replace things like caps and contactors.
Make sure to use this link before every HVAC purchase. You can also search for other tools such as my Fieldpeice probe kit once you click that link, so he can get a little kickback for all his efforts with his YouTube channel and this forum.
If you have question, feel free to ask!