preliminary second coil (fits on frame upside down). Looks great but have some structural frame work to add as its quite heavy and must vibrate as required. Stands 1 meter tall with an apex angle of 34.34 degrees. As usual, I will leave the post up for a few days before I take it down again

This is longer audio excerpt from the secon or third private session with Bashar. He give the general measurments and confirm that this is exactly what Nicola Tesla was thinking to do with the Wardenclyffe Tower. (notice hist intonation while he is doing that). The Wardenclyffe Tower is 57 meters tall and Bashar explained that 10-11 meters are actuall enough. In the last sessions he said N.Tesla now know from spirit that the initial scale he invision can bu much smaller.

Here is a PDF with my interaction with Claude AI which is programed with skill to be as Research assitant. Inside the PDF you can see my blury, random noise question first, just wrote what came first. Then ask Grok to gleam the grammar mistakes and structure it as Buletpoint with clean structure and feed this as question to Claude. Then you see what the response is. Im sharing this because Im fascinated by the clarity and reasoning with this AI model, and Im sure that will help us tremendously to move the project further. It understood the Manual perfectly and brake down the loginc in clear and organized structure. Its jus very useful. Also, will add the images that Was uploded to with the first question. It really helps to understand the creative process of energy from many new perspectives.

What is improved? A small ring 3 mm thick with a 20mm diameter and 7 mm hole is added to the top of each cone to serve as a guide and create perfect alignment with the copper spikes at the exact center of the configuration. (Look the first image At the bottom, the Spiraling sections are trimmed, and this allows a flat base for better adhesion with the 3D printing Bed. Without this adjustment, I`m not sure if it's even possible to be 3D printed with FDM printer. You can download the Files from here if you want, and also a small 19.5 Degree cone is added as well, with 33.3cm height for those of you who want supper low budget option to experiment. This 19.5 Degree STL can be used as a mold for Fiber Glas or Kevlar, Carbon Fiber or other composite materials to create the cones and later use it as a base for the copper wire, which might be 0.35mm thickness. Basically, to use the same method that I created the previous cones, but smaller and with thinner wire. The Idea here is to create 2 or 3 Identical cones and see if they can transfer the power over a greater distance or can be used to activate the space-time antennas instead of using standart Tesla Transformer. The total cost for all 5 files was a bit less than 200Euro including shipping and the order is placed today. We can now see if this can actually be printed with PETG, and if yes what will be the quality. If these files are working, anyone can print them and make the cones very easily.