Hear me out...I use a 1 to 3 merge for the down pipe so I can out flow 3.0 diameter but yield higher pitch with smaller tube diameter 👌🧑‍🏭😇

In my last post I mentioned my project car and I wanted to share some progress with y’all! I also just started a tiktok page where I’m uploading some videos I took from up to three years ago. If you want to check it out it’s @thelewisgarage The car is a 1993 Honda Prelude VTEC, came with an H22A which promptly got ripped out for the H22A4 I built. It’s got fully forged internals, a custom intake manifold I made, and some other goodies. Recently I installed and port matched a 70mm throttle body to it, and I put a T3/T4 hybrid turbo on it with a mystery manifold which I plan on swapping for a twinscroll that I plan to build myself. It’s been a super fun project so far, and I hope to finish soon, but who knows. Money is tight right now 😂

⅛ aluminum 150amps with pedal 17cfh #5cup 3/32 tungsten and filler 150hz 31AC balance 5356 wire

@Landon J @Iwan Van der steen @Harry Koppelman @John Hogan @Ron Radford @Yonatan Varshaviak Glad to have you all here. Please make an introduction post using the “write something” bar at the top of the home page. Tell us about what you do, show us some of your work, or ask a question so we can help you wether you’re just starting or looking for help to improve.