Hi all, i need to draw manually 10's of these line that needs to coincide with the curvature. in the image you see black defined curve, where the undefined blue sketch must be coincide. first i sketch a dash line then a midpoint line that is perpedicular to the dash line, and then coincide with the curvature. this method is laborious, is there a way to automate or use any feature to swift the work. thank you in advance.

Hi. The part in this assembly has a path made out of many circles. If you look closely you'll see a rebuilt circle. That's the place where a fixed bar shall come and follow the path of many circles. Now I can't figure out how I should draw a path so it won't interfere with the bar or rebuilt circle. I made the cut extrude with many circles by turning the part a bit and draw a circle on the rebuilt circle and then fixed it and exiting the sketch and then rotating it a bit and go back to add another circle.

Hi, may I please ask for some guidance for sweep cut. I'm not very familiar with sweep cut and need some help to solve this issue. I have a circular cut out of a pipe wall which I want to make a weld prep like the sketch. When I model this I'm not able to create the weld prep with the vertical mid-line vertical all around, it seems like the mid-line angle outwards and doesn't cut even around the model. The front plane view looks right, but the Right plane view is wrong. Thank you in advance.

Hi, as you see in the video the part that moves is slipping. Now is there a way of making the round part nicely roll on the flat surface without slipping?

hi friends, how can I import a lidar scan inside solidworks and work on top of it like a retopology inside maya or blender. Help anyone ? any good docs out there on this ?