@Morgan Kolar @Victoria Reed @Paul T @Jalen Hill @Michael Jordan @Gilbert Avila @Molten Metal @Tomáš Rábl Glad to have you all here! Please make an introduction post using the “write something” bar at the top of the community page. Include some pictures of your work so we can get to know you or if you’re just getting started let us know what you’re interested in learning so we can get you started right away!

@Bryce Grant @Saif Bouchnak @Lu Jam @Saul Garcia @Joe Kiss Glad to have you all here. Please make an introduction post using the “write something” bar at the top of the home page (if you haven’t already). Show us some of your work good or bad, or if you’re brand new just tell us what you’re hoping to learn from this group and we can get you started on the right track!

@Abdulkadir Ali @Mikeal Richards @Jonas Pichler @Satyajit Lahon @Tj John @Daniel Gartley Happy to have you all here! Please make an introduction post using the “write something” bar at the top of the community page. Please share some photos of your work so we can get to know you or if you’re just starting out tell us what you’re hoping to learn so we can help you get started!

@Gage Hicks @Carl Madison @Mark Cole @Myles Mcclellan Glad to have you here, please make an introduction post using the “write something” bar at the top of the community page. Include photos of your work or if you’re just starting out and don’t have any just tell us what you’re hoping to learn from this group and we will do whatever we can to help you get started!

Practicing on some aluminum #6 gas lense cup at 25 cfh 250 amps on the machine using the pedal 3/32 4043 filler rod 1/8” aluminum 3/32 2% lanthanated tungsten 70% EP AC Balance 140 HZ AC Frequency.