𝐏𝐀𝐋𝐈𝐂𝐀𝐃: 𝐋𝐈𝐆𝐇𝐓𝐖𝐄𝐈𝐆𝐇𝐓 𝐂𝐀𝐃 𝐖𝐈𝐓𝐇 𝐀𝐍 𝐎𝐏𝐄𝐍 𝐊𝐄𝐑𝐍𝐄𝐋 𝐔𝐍𝐃𝐄𝐑𝐍𝐄𝐀𝐓𝐇. I ran PaliCAD through my TPS REPORT research automation pipeline, because the question on a real job is never just "does it model?" It is: can I move the geometry, can I trust it offline, and does it lock my data in? PaliCAD is a lightweight, direct-modeling 3D CAD app, built on its own geometry kernel called Pali Ijo. Sketch on a construction plane, extrude a solid, edit the faces and edges directly. No parametric history tree to fight when you just need to change a shape. It works on Windows, Mac, Linux, and iPad, and it is fully offline. On iPad it is built for touch and Apple Pencil, plus keyboard and mouse. What it does, in plain terms: Sketch with lines, circles, rectangles, polygons, and splines, then extrude and refine. Combine, subtract, and intersect solids, with fillets, chamfers, and hollowing. Inspect faces and edges, run section analysis, and check what is actually inside the model. It reads and writes the formats that matter for moving work along: STEP, STL, 3MF, and DXF. Projects save as native .pali files, cross-platform. Here is the part that matters most for construction and for AI work downstream: Pali Ijo is a standalone Dart CAD kernel, boundary representation, mesh operations, measurements, and file interchange. It is MIT licensed, and it can be used independently of the PaliCAD app and Flutter. That is different from the app itself. The app source is no longer in the public repo. The repo now carries the kernel source and project information. The app is sold through Patreon and the iPad App Store, and the app license and branding are retained by the builder. Do not mix those two up. What the TPS REPORT - security JMAC-Secure-Cyber-Code-Review powered by https://github.com/JMacCyber/JMac-Secure-Code-Review review found: The kernel code review came back with zero confirmed findings at the reviewed commit. For local, offline use, the review rated it low risk.

𝐈𝐒𝐎 𝟏𝟓𝟏𝟒𝟑 𝐏𝐀𝐑𝐓𝐒 𝟏–𝟓: 𝐓𝐇𝐄 𝐃𝐀𝐓𝐀 𝐋𝐀𝐍𝐆𝐔𝐀𝐆𝐄 𝐎𝐔𝐑 𝐌𝐀𝐂𝐇𝐈𝐍𝐄𝐒 𝐖𝐄𝐑𝐄 𝐌𝐈𝐒𝐒𝐈𝐍𝐆. Most jobsites do not have a data problem. They have a translation problem. Every OEM portal, every telematics box, every spreadsheet speaks a different dialect. ISO 15143 is the fix. Not another dashboard. A common language. Here is the family, in plain field terms: Part 1 is the architecture. How worksite data moves between the contractor, the site system, the machine, and the measuring equipment. Part 2 is the data dictionary. Same words, same definitions, same attributes. No more guessing what a field means. Part 3 is AEMP 2.0. Mixed-fleet telematics, one API. Location, hours, idle, fuel, distance, payload, and machine health, across brands. Part 4 is worksite topographical data. The site itself. A common design model, standardized RTK correction and localization, and project, as-built, and production data exchanged between servers, regardless of vendor. Part 5 is the one to watch. It is still being shaped, and it points to where autonomy and the next worksite exchanges are heading. Why this is a game changer: Equipment and tools report once, in the same format. Site logistics stops being a phone call. You know where the machine is, what it did, and what it needs next. Site monitoring stops being end-of-week reconciliation. As-built and production come back against the design while you can still act on it. Project management gets real numbers. Utilization, cost per hour, and cost per unit of work, not gut feel. ERP gets the same truth. Hours, fuel, payload, and location land against the right asset, the right job, and the right cost code, without retyping it three times. That is data intelligence. That is interoperability. AI only helps when the data underneath it can be trusted. If the data is fragmented, AI just automates the confusion faster. If the data is standardized, AI can actually see the job. Start small. That is my field rule. Pick one mixed fleet. Pick one site. Pick one feed, Part 3, and prove it lands clean in your ERP.

Hey, I'm Jobi 🔨 Denver general contractor — I run new builds and additions here in Colorado. Been in construction since 2003, with a long detour climbing cell towers along the way 🗼 These days I split my time between jobsites and building AI tools. I built the permit-tracking portal my company runs on every day, and through my shop, Armstrong Solutions, I turn the automations that work for us into tools other contractors can use. Your turn 👇 Drop your intro below — who you are, what you do, and what you'd love AI to take off your plate.

𝐀𝐈 𝐈𝐍 𝐇𝐄𝐀𝐕𝐘 𝐂𝐈𝐕𝐈𝐋: 𝐍𝐎𝐓 𝐍𝐄𝐖. 𝐉𝐔𝐒𝐓 𝐅𝐈𝐍𝐀𝐋𝐋𝐘 𝐔𝐒𝐀𝐁𝐋𝐄. I keep hearing AI in Construction framed like it just arrived. It didn't. It's been in predictive analytics and machine control for years. What's changed is how usable it is in the field. Datumate captured a conversation I @Todd Sutton had with Tom Jennings and Dr. Florent Poux on exactly that shift. Three things stood out to me: - Autonomous machine control first introduced mid 1990's for use with less skilled Equipment Operators and AI-assisted ground control are saving real time, not demo time. - Point clouds stop being pretty scans when you inject knowledge into the data. Then they become decisions.Using a GEOSPATIAL OS in your Framework Anchor - Disparate data is no longer the blocker. RAG and vector databases can piece it together from across your repositories. My take, same as it was in that conversation: Start small. Start with classical approaches. Use deep learning only when those fail. Frameworks and Automation Pipelines are your Foundation to Build on. You will fail at first. Test it rigorously anyway. Then you'll have something solid. Where are you actually using AI on a job right now, not just talking about it? Leave a comment below. Full article here: https://www.datumate.com/blog/the-role-of-ai-in-heavy-civil-construction/