I recently took over a route from a seasoned solo operator who "does it his own way," and I'm new to the industry. Weekly service in a really hot, humid, sunny climate, using trichlor tabs + cal-hypo shock. A lot of these pools are testing CYA 100+. The guy I learned from said he intentionally keeps CYA high so the chlorine holds up in the heat between weekly visits. Here's what I'm running into: my test strips show free chlorine around 3-4 ppm, which looks fine, but I'm still getting green algae and having to brush a lot of these pools every week. From what I've been reading, with CYA that high, 3 ppm FC isn't actually doing much because most of the chlorine is tied up with the CYA. Some sources say you need FC around 7.5% of CYA minimum (so ~7.5+ ppm at CYA 100). A few questions: 1. Is that right? Is my strip technically accurate but misleading because 3 ppm isn't enough at that CYA level? 2. For those of you running weekly routes in hot climates, what CYA range do you actually keep pools at, and why? 3. Is there a legit reason experienced guys run CYA 100+ in summer that I'm missing? 4. For pools already at 100+, do you partial drain, or just run higher chlorine and live with it? Thanks everyone, I appreciate the insight! Patrick