Activity
Mon
Wed
Fri
Sun
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
What is this?
Less
More
5 contributions to Research Peptide Community
B12
Looking at B12 and it says liquid. Does that mean it does not need to be mixed with BAC?
Correct. You don't need to add any BAC water.
Research Help Please
Hello Everyone, Help please, I have been using tirz for more than 8 months now and I wanted to try glp3 retra. because quality of finding a good cheap tirz supplier dwindled. But anyways I ordered Retra 100mg vial can someone please help me with the BAC mixing and starting dose since I have been on tirz for 8 months is my starting dose on retra goin to be more? Is Retra 100mg vial / 2ml bac water = equal 0.02ml making 20units the right place to start??? Getting 10 research doses out of my 100ml vial? Finally because I was on tirz is retra going to be less effective? Thank you very much and help would be greatly appreciated :) :)
0 likes • Oct 12
@Divine Rose IMHO your next dose should be 3 or 4 mg at the most. Moving up to 5mg might cause more bloating, constipation, headache and fatigue. In clinical trials the increases were +2mg every 4 weeks. Adding 2mg to your 1.5mg would give you 3.5mg. Congratulations on getting within 10 pounds of your goal. If you lose about one pound a week on your next dose you'll be at a good pace. I think everyone reacts differently when switching from tirz to reta. I've heard of several others unable to tolerate a starting dose of 2mg due to headaches. They think a 2mg starting dose of reta is too high even though that's where the clinical trials started.
0 likes • Oct 12
@Divine Rose I hope you're not starting KLOW when you're increasing reta. You won't know if any symptoms are from KLOW or your increased reta. Please wait until you're happy with your reta dose before starting KLOW. I copied this from https://peptidefox.com/tools/klow-dosage-calculator "Each KLOW dose is 1.6–4.8 mg per injection. An 80 mg KLOW vial reconstituted with 2.5 mL BAC water (32 mg/mL) results in a dose of 5–15 syringe units." "The per injection dose stays constant throughout the 12-week protocol: Daily in weeks 1–4, 5x per week in weeks 5–8, and 2-3x per week for maintenance in weeks 9–12." There's a reconstitution calculator on that same page. Since your vial has 53+ mg of GHK-Cu the calculator will take that into account and do the calculations for you. The calculator for KLOW will look like the first image when you start. Type each peptide amount into the calculator. It should then look like the second image. Next click the blue box that says "Confirm vial." It should then look like the third image. Next click the blue box that says "Confirm dose." It should then look like the fourth image. The fourth image tells you how much BAC water to use depending on the size of your vial. There is another blue box that asks you if you want to try FoxAI. There is an optional paid subscription to get personalized advice. I am not an affiliate nor am I connected in any way to Peptide Fox other than using it in the past. There is a lot of free information so don't feel like you have to subscribe in order to use the website.
Searching
Any ideas on where some one could get some klotho?
Biolongevity Labs has Klotho. https://biolongevitylabs.com/product/klotho/
Dosing Question
What is the max dose in units can I take when on T-GLP2? I have been with this company for a month and a half, I have lost 2 lbs. I have been on an GLP1 for approximately 18 months and have lost a total of 33 lbs. I'm 51 and metapausal. Should I be taking something else with my T-GLP2 or try something else? I eat for the most part high protein, low carb add very low sugar. Thank you in advance!!
0 likes • Jul 10
@Elaina Wagner It sounds like you could increase your tirzepatide dose since most people can lose more than 2 pounds in a month and a half. But first we need to calculate what your current dose is in mgs. In order to do that we need to have the following information: • What does the label on the bottle say in mg ? • How much BAC water did you add or was it already diluted for you? • How many units on the syringe are you using? Let's start there and see if we can get you on a higher dose. If you've already been taking the highest weekly dose (15mg) then there may be some other things to try.
@Elaina Wagner Let's see if I've got this right. • Your vial says 146.31 mg. • You added 7.1 ml (7,100 units) of BAC water. • Your dose has been 60 units. One ml contains 20.6 mg tirzepatide. (146.31 divided by 7.1) Your 60 unit dose is 12.36 mg ( 20.6 x 0.6). A weekly dose of 12.36mg is very close to the maximum of 15 mg per week. Do you feel like your appetite is suppressed? It should be suppressed on that dose. Do you know approximately what your daily calorie intake is? It should be a lot less than before you started using tirzepatide (obviously). Have you considered trying cagrilintide? It works on a different receptor than any of the GLP-1's. Another GLP-1 you could try is retatrutide. This may or may not be relevant: My own preference is to only use a vial strength that is going to give me 4 to 6 weeks of doses. That's just a rule of thumb taking into account how most peptides degrade over time. I don't know if that's true or not for tirzepatide. I assume you kept the vial frozen until you were ready to reconstitute it, then kept it refrigerated once you'd reconstituted it. (Sorry I had to ask just in case.) I wish I could provide better answers for you.
Mixing on Glp 2 Help
Hey guys so I need a little advice like asap. So the way me and my friends have been mixing the meds we kind of make it, we're bad at math idiot proof. For example, if we have a 20 mg vial we do full syringes which is 100 units per syringe which equals up to 200 units. That way when her dose is 2.5 we know to take exactly 2.5 or the dose is five. We take exactly five. With that being said, she has a 60 mg bottle and does not think six full units of the syringe will fit into the bottle. We need help. Mathing. I told her what I think is if we do three units instead of the six. We just cut the dose in half. Because technically we're cutting the amount of solution in half. So then her starting dose instead of 2.5 would be 1.25. am I correct in this? Is there an easier way like we're 5 years old? Thank you guys
@Nichole Scordato Here is another peptide calculator that is easy to use. It has typical vial sizes but you can also enter a custom vial size and it will work out the math for you. https://peptidefox.com/tools/calculator Not all vials will have exactly 30 mg or 60 mg. Ideally you should use the weight in milligrams (mg) that is listed on the COA. The calculator above will work with oddball mg amounts to give you round unit amounts on your syringe draw. In this example I put in a custom amount for the size of the vial: 65 mg. Then I put in a custom amount for the dose: 2.5 mg. The calculator worked out the rest. After adding 2.6 ml of BAC water the syringe draw will be 10 units. That gives a dose of 2.5 mg. The first screenshot shows what the calculator looked like before I entered anything. The second screenshot shows what it looked like when I was done.
1-5 of 5
Mary-Jane Kohler, MT ASCP
2
15 points to level up
@mary-jane-kohler-3006
Science nerd -- was a Medical Technologist, competitive swimmer and gym rat in a past life. Now living with 36 years of post-viral illness (ME/CFS).

Active 22m ago
Joined May 31, 2026
Powered by