Activity
Mon
Wed
Fri
Sun
Aug
Sep
Oct
Nov
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
What is this?
Less
More
Memberships
Full-Time Tuner
34 members • $27/month
CutterUp Diesel Lab
94 members • Free
10 contributions to CutterUp Diesel Lab
1d •
He351cw vband clamp size?
Picked up new 4” v band clamps for my Dow pipe and 45 on the turbo. lol, neither fit. Princess auto and green line have zero v bands. Tried Lordco and they have none that big. Cummins dealer had nothing in stock but could order. Does anyone know the v bands clamp size for; Downpipe to 45 fitting size And Turbo cartridge to 45 fitting size Both are not the same as I found out the hard way. Also, where can I get it? Thanks !
1 like • 15h
Yea I've given up on mix n match v bands. I just buy the 2 halves and a clamp as a set and cut off whatever was there originally n weld the new set in
1 like • 15h
Unless the oringal is kind close. I've ground lips off or steps on the sealing face a little bit to make em work
15d •
Something a little different.
Kingpin | Madman Developments https://share.google/x4K36IsHabrDBp0l4 In my opinion the lack of inputs will likely make its negligibly better than the spring and star wheel but what do I know. I'd at least like to see rpm in and maybe a gear input
Jan 20 •
Orings vs fire rings
I was working on oring some heads today and thought I should do a quick video https://youtu.be/7KWmGYT7cCo?si=d3QXG24JcjiqbmCv
0 likes • 29d
I'm planning on using an MLS head gasket I want to raise the compression and use the minimum piston to head clearance. Can I pull layers out of the MLS? How many layers do they come with? Otherwise I'll have the block decked
May 25 •
Timing chain
I think I have my timing 180 degrees out because instead of blowing it’s sucking when trying to test compression if anyone has any other thoughts or tips lmk
0 likes • May 30
@Weston Atkinson it fixed it? Usually those marks are only 2° or so off for adjustment
0 likes • May 31
@Weston Atkinson very interesting
May 29 •
Tach solutions
I've got an intercooled Ve motor. What runs the tachs on these motors? How do the alternator run tachs calibrate?
0 likes • May 29
@Eric Fuller mines 89
0 likes • May 29
Maybe it is a non intercooled? I pulled it out of a suburban that was a bit of a shambles swap. The valve cover said intercooled but I was told it's an 89
1-10 of 10