@Josh Vassar since it’s just the lowers and approximately 13 doors/draws total. Scuff sand, priming, and 2 coats of paint. I’d approximate 2-3 days. Also what primer would you guys recommend?

@Todd Plahs All good Todd, I don't think their should be grease these cabinets have only been installed for a year or so now. But noted on the price, pretty much was going to remove all doors, sand, prime for 2 coats, then 2 coats of finish paint. I will be rolling them, I don't have a spray set up. I rolled some other cabinets when I was working with my partners uncle in remodeling they came out like they were sprayed.

Hey Daniel for the concrete I used Loxon XP by Sherwin it worked Great super thick! But be sure to ask your Sherwin rep if you need to prime before. Rep I spoke with stated I didn’t need primer.

Honestly love the spirex brushes, been using the 2 1/2 for my jobs. I feel like it is very maneuverable especially when you get into the corners. I was using arrow worthy brushes from Home Depot and I tried Wooster before which I do like for trim. The clearcut Purdy I tried out was great but when I used it again for another job it was so soft on the bristles and I like stiff.