Activity
Mon
Wed
Fri
Sun
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
What is this?
Less
More
3 contributions to RMS Auto-electrics/Diagnostics
5V reference, Case Study
Hi Rob, Just watched the 5V ref. short Video. Very helpful in understanding more in depth!👍 Grüße Chris
0
0
New case study: Skoda boot fault
New case study just gone live in the classroom 🔧 Skoda boot fault. Have a read, see if you'd have got to the bottom of it, and drop your thoughts below 👇 https://www.skool.com/rms-auto-electrics-diagnostics/classroom/75813465?md=4dc2f084080f4e629f42455dc4ab042c
0 likes • 1d
Hi Rob, I’ve just watched your video on the Skoda boot fault. As always, it was very helpful to see your methodical approach to diagnosing the problem. That’s exactly the sort of thing I’m looking for. Having watched some of your other YouTube videos, I was wondering whether it might be possible to occasionally include an on-screen close-up of the multimeter or Power Probe readings. I mean, checking for a good ground or a solid positive supply is usually quite straightforward. It’s the more puzzling readings, the ones that really make you scratch your head, that interest me the most. Those are the situations where I sometimes struggle to understand exactly what the readings are telling me, and I'd love to learn more about how you interpret them and what they mean in practice. Would it be possible to show those readings a little more clearly in future videos? I think it would be a really valuable addition for people like me who want to understand the diagnostic process in greater depth. Thanks again for sharing your knowledge. I hope you take this as positive and constructive feedback. Keep up the great work! Grüße aus München
Widerstand/Resistance
Hi Rob, Just watched your Fudementals High Resistance Slide 2. Years ago a T2/ VW came into the shop. It had already been in two other Garages. Had a new Starter Motor, wiring even a new engine Block. (the vehicle had a used car Garantie.) We noticed on this very intermitant fault a High Amperage of 220...250Amps. On the old boxers the Gear of the Starter Motor had a copper/ Bronze bush supporting and centralising the Starter Motor shaft. If badly worn the Starter Motor can Block or cause a slow start. You talked of HIGH Resistance and a Low Amperage? In my Case due to the Higher mechanical force needed I had a Higher than normaly expected Amperage. Were you Just referring to the Higher Resistance of the wiring/ Connections causing a Low Amperage Reading? Grüße aus München Chris
1-3 of 3
Christopher McVeigh
1
5 points to level up
@christopher-mcveigh-7449
Chris ,living and working in Munich Germany for over 20 years. Currently employed at a Dealer in Munich.

Active 6h ago
Joined Nov 15, 2026
Powered by