@Benjamin Lauterbach @Jr Lee @George Kouris @Roy Houston @Mason Loomis @Peter Show Glad to have you here! Please make an intro post in the community tab showing us some of your work or asking us about anything you need help with so that we can get to know you!

@Bryce Dowell @Noah Lochner @Mathew Busiko @Matthew Britt Glad to have you here, if you haven’t already please make an introduction post and show us some of your work so we can get to know you!

Got to start welding on the manifold but I have to send it to the customer to test fit since there are a few things we are afraid will be tight. This delays the video by a week or so but better safe than sorry! 2” SCH 10 321 stainless 100 amps on the machine using pedal 3/16 knife edge bevels 1/16 347 filler rod 18 seconds post flow no pulse 1/16 2% lanthanated tungsten #19 furick cup @40 cfh

Hi guys, I just joined this community. I just want to say hi. I'm a welder from the UK, I have almost 20 years experience, 18 of those predominantly GTAW, and roughly 10 years SMAW, with bits of MIG/MAG in between. My background is in the oil and gas, petrochemical and pharmaceutical sectors. I've operated my own Ltd business 3 years now, welding anything and everything that I can bring in my shop. When the shop work gets slow I pick up the phone and do a few months contracting out to some of my old employers to bring in the cashflow to run my shop and to live. I'm here to offer advice where i can. Mainly GTAW where I can offer the best help. Im also here to learn, get pointers from anyone with more experience than me in both business and welding because its hard work growing the shop. Also my MIG/MAG welding is passable at best. I hope I can help you guys as much as I hope to get in return. Cheers Scott

@Zachariah Shaffer @Jorge M. Jaramillo @Bryan Garrett @Scott Birch @Mohamed Amer Goad to have you, please make an introduction post if you haven’t already and share some of your work so that we can get to know you!