Activity
Mon
Wed
Fri
Sun
Sep
Oct
Nov
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
What is this?
Less
More
Memberships
Paintless Dent Repair Training
81 members • $399
2 contributions to Paintless Dent Repair Training
May 25 •
Lateral tension glue
What’s up guys ! What glue do you guys recommend for the lateral tension tabs ???
2 likes • May 26
May be the wrong answer, but whatever glue is in my glue gun. Usually Tab Weld gray.
May 15 •
Knock Downs
I’ve been reading a lot of good things about flat end knock downs. I’ve read they are a little more accurate than the soft tips, because the soft tips tend to take down a little more of the metal around them whereas the flat tips only take down what you hit. They’re fairly expensive on some of the PDR sites, but I found these center punches for $12 and they are nice and long at 8 inches.
1 like • May 15
You have to be careful with the center punches since the outer edge is usually very sharp. There are a lot of homemade or repurposed tools being used so they will work, but that sharp edge will cause lines in the paint if it is not perfectly straight. You could round the edges off with a grinder or sander to make it less likely to damage the paint and they would work just fine.
2 likes • May 15
I say that because I did it. That sharp edge will cut into the paint if you are not careful.
1-2 of 2
