User
Write something
Learn to 3D Model Your Project is happening in 38 hours
Want to take your halloween decorations to the next level?
Try this out! - Braided Fishing Line: https://amzn.to/4zfknxn
How to make Low Lying Fog
If you're into spooky season, this is one DIY build you'll want to check out!
My Son Wanted to Earn Some Money. He Knows What To Do!
We were running low on firewood so we made a trip to the mountains on Friday. Now we have a full cache and it's time to go to work...for my kids haha. (Yes, they split all of it so they can sell it locally as firewood) 😁 How's your weekend been so far?
Day 8 of Building a Table
How to Make a Table Rigid Now we'll review three different ways to add more stability to your table. Method #1: Adding an Apron or Stretcher Like in the picture below, you can add an apron or stretcher which are horizontal pieces that connect your table legs together to make your table more structurally stable. Our dining room table uses a box apron, which ties all four legs together into a sturdy frame. This design not only strengthens the table but also gives you more solid spots to attach braces and other hardware. ✅ Pros - Stabilizes your table by creating a frame between all four legs. - Ties all parts together so the base acts as one solid piece ⚠️ Cons - May not fully prevent wobbling over time. - If your table isn’t very tall, adding an apron can reduce legroom and make the table feel shorter or make your table look weird from the side.
Day 8 of Building a Table
Day 7 of Building a Table
We've built our table top. We've built our legs and Apron. Now let's talk about the best way to attach the two to each other! The attached photos show one awesome way to attach the two together. It's incredibly simple too! You need to allow your table top to grow and shrink with the moisture in the air. The best way to do this is to allow the table top to "float" on top of the legs. We need to attach our 2" tall apron to our table legs to make a solid platform. Before we attached them, we need to cut a small groove close to the top. This groove is called a dado and it will receive these small steel clips. The dado is small enough you can do it with a table saw or circular saw. If you have a router, that's a good option as well, but you'll need a really thin bit and a guide. 👀 What You’re Looking At: The dado is a small groove cut into the backside of the table apron. The fasteners slide into this groove and secure the tabletop to the base but still allows the table top to "float" which means it can naturally shrink and swell with humidity without damaging the base. How to Use the Clips (Step-by-Step) 1. Cut a shallow dado along the inside of the apron. 2. Slide one end of the fastener clip into the dado. 3. Screw the other end of the clip into the underside of the tabletop. - ⚠️ Important: Use short screws so they don’t poke through the tabletop. Thanks for joining us today. We'll discuss more tomorrow!
Day 7 of Building a Table
1-30 of 87
U Can Build This
skool.com/ucanbuildthis
Fix More. Build Better. Hire Less.
Understand which tools get the most done, reduce your trips to big box stores and finish in half the time.
Leaderboard (30-day)
Powered by