Before you load the dishwasher, do you rinse every plate under the tap first? Most of us were taught to do that. It feels like the right thing to do. But for most modern dishwashers, it’s a mistake. 🚫 It wastes water, and it can actually make your dishes come out less clean.
𝑆𝑜 𝑑𝑜𝑛’𝑡 𝑚𝑎𝑘𝑒 𝑡ℎ𝑖𝑠 𝑜𝑛𝑒 𝑚𝑖𝑠𝑡𝑎𝑘𝑒 𝑤𝑖𝑡ℎ 𝑦𝑜𝑢𝑟 𝑑𝑖𝑠ℎ𝑤𝑎𝑠ℎ𝑒r! I’ll explain why rinsing can backfire, what to do instead, and a few loading habits that make a real difference. 🧼 Read to the end so you don't miss the last one, because it’s a tiny change most people never think of!
Here’s why rinsing can backfire. Most dishwasher detergents today contain enzymes. 🧪 Enzymes are made to break down food, like egg, starch, and grease. When there’s no food left on the dishes, they have less to work on. And many newer dishwashers have a soil sensor. It checks how dirty the water is, and decides how long and hot to wash. If you’ve already rinsed everything clean, the machine may think the load is light and run a shorter, gentler cycle. So stuck-on bits can stay stuck. 𝑇ℎ𝑎𝑡’𝑠 𝑤ℎ𝑦 𝑑𝑒𝑡𝑒𝑟𝑔𝑒𝑛𝑡 𝑚𝑎𝑘𝑒𝑟𝑠 𝑎𝑛𝑑 𝑚𝑎𝑛𝑦 𝑎𝑝𝑝𝑙𝑖𝑎𝑛𝑐𝑒 𝑒𝑥𝑝𝑒𝑟𝑡𝑠 𝑛𝑜𝑤 𝑠𝑎𝑦 𝑡𝑜 𝑠𝑐𝑟𝑎𝑝𝑒, 𝑛𝑜𝑡 𝑟𝑖𝑛𝑠𝑒.
On top of that, rinsing under a running tap can use more water than the whole dishwasher cycle. 💧Many modern dishwashers use only a few gallons per load.
So here’s what to do instead. Scrape, don’t rinse. 🗑️ Use a spatula or a used napkin to push food scraps into the trash. Big pieces, bones, and sauces go in the bin. A little leftover food on the plate is fine. In fact, it helps.
𝐵𝑢𝑡 𝑡ℎ𝑒𝑟𝑒’𝑠 𝑎𝑛 𝑒𝑥𝑐𝑒𝑝𝑡𝑖𝑜𝑛. If the dishes will sit for a day or two before you run the machine, food can dry hard. In that case, use the dishwasher’s rinse-only setting if it has one, instead of the tap. ⏳
Now, the loading habits that matter. 𝑭𝒊𝒓𝒔𝒕, 𝒅𝒐𝒏’𝒕 𝒃𝒍𝒐𝒄𝒌 𝒕𝒉𝒆 𝒔𝒑𝒓𝒂𝒚 𝒂𝒓𝒎𝒔. 🚿 Tall pans or cutting boards in the bottom rack can stop the arms from spinning. Give them a quick spin by hand after loading. If they hit something, move it.
𝑺𝒆𝒄𝒐𝒏𝒅, 𝒅𝒐𝒏’𝒕 𝒃𝒍𝒐𝒄𝒌 𝒕𝒉𝒆 𝒅𝒆𝒕𝒆𝒓𝒈𝒆𝒏𝒕 𝒅𝒐𝒐𝒓. A big plate or tray in front of the dispenser can stop it from opening, and the detergent never gets out. ⚠️ Your dishes come out dirty, and you’ll blame the detergent.
𝑻𝒉𝒊𝒓𝒅, 𝒇𝒂𝒄𝒆 𝒕𝒉𝒆 𝒅𝒊𝒓𝒕𝒚 𝒔𝒊𝒅𝒆 𝒕𝒐𝒘𝒂𝒓𝒅 𝒕𝒉𝒆 𝒔𝒑𝒓𝒂𝒚. Bowls and cups go face down, angled toward the center. Plates in the bottom rack face the middle. 🍽️
𝑭𝒐𝒖𝒓𝒕𝒉, 𝒅𝒐𝒏’𝒕 𝒐𝒗𝒆𝒓𝒍𝒐𝒂𝒅! Dishes need space for water to reach them. If two bowls nest together, neither one gets clean. 🚫
𝑭𝒊𝒇𝒕𝒉, 𝒑𝒖𝒕 𝒕𝒉𝒆 𝒅𝒆𝒕𝒆𝒓𝒈𝒆𝒏𝒕 𝒘𝒉𝒆𝒓𝒆 𝒊𝒕 𝒃𝒆𝒍𝒐𝒏𝒈𝒔. Pods and powder go in the detergent cup, not loose in the bottom, unless the package says otherwise. 🫧 And keep the rinse aid topped up. It helps water slide off, so glasses dry without spots, especially if you have hard water.
𝐴𝑛𝑑 ℎ𝑒𝑟𝑒’𝑠 𝑡ℎ𝑒 𝑡𝑖𝑛𝑦 𝑐ℎ𝑎𝑛𝑔𝑒 𝑚𝑜𝑠𝑡 𝑝𝑒𝑜𝑝𝑙𝑒 𝑛𝑒𝑣𝑒𝑟 𝑡ℎ𝑖𝑛𝑘 𝑜𝑓. Run your kitchen tap until the water comes out hot, before you start the dishwasher. 🔥 Many dishwashers fill from the hot water line. If the pipes are cold, the first fill is lukewarm, and the detergent doesn’t work as well. Thirty seconds at the sink can mean cleaner dishes.
𝐴𝑛𝑑 𝑤ℎ𝑖𝑙𝑒 𝑦𝑜𝑢’𝑟𝑒 𝑎𝑡 𝑖𝑡, 𝑐𝑙𝑒𝑎𝑛 𝑡ℎ𝑒 𝑓𝑖𝑙𝑡𝑒𝑟 𝑜𝑛𝑐𝑒 𝑎 𝑚𝑜𝑛𝑡ℎ. 🧽 Many people have never touched it. A clogged filter means dirty water gets sprayed back onto your dishes. Most twist out from the floor of the machine. Rinse it under warm water and put it back.
𝑺𝒐 𝒓𝒆𝒎𝒆𝒎𝒃𝒆𝒓. 𝑇ℎ𝑒 𝑚𝑖𝑠𝑡𝑎𝑘𝑒 𝑖𝑠 𝑟𝑖𝑛𝑠𝑖𝑛𝑔 𝑦𝑜𝑢𝑟 𝑑𝑖𝑠ℎ𝑒𝑠 𝑐𝑙𝑒𝑎𝑛 𝑏𝑒𝑓𝑜𝑟𝑒 𝑙𝑜𝑎𝑑𝑖𝑛𝑔. 🚫 𝑆𝑐𝑟𝑎𝑝𝑒 𝑖𝑛𝑠𝑡𝑒𝑎𝑑, 𝑘𝑒𝑒𝑝 𝑡ℎ𝑒 𝑠𝑝𝑟𝑎𝑦 𝑎𝑟𝑚𝑠 𝑎𝑛𝑑 𝑑𝑒𝑡𝑒𝑟𝑔𝑒𝑛𝑡 𝑑𝑜𝑜𝑟 𝑐𝑙𝑒𝑎𝑟, 𝑟𝑢𝑛 𝑡ℎ𝑒 𝑡𝑎𝑝 ℎ𝑜𝑡 𝑓𝑖𝑟𝑠𝑡, 𝑎𝑛𝑑 𝑐𝑙𝑒𝑎𝑛 𝑡ℎ𝑒 𝑓𝑖𝑙𝑡𝑒𝑟 𝑚𝑜𝑛𝑡ℎ𝑙𝑦!
Give us a thumbs-up👍, leave your comments below, and invite your friends to join The Big Sweep community. Click here to subscribe to The Big Sweep YouTube Channel for the complete experience! 𝑾𝒂𝒓𝒎𝒆𝒔𝒕 𝒓𝒆𝒈𝒂𝒓𝒅𝒔,
𝑲𝒆𝒍𝒍𝒚 𝑴.