Please see below our Depo interior clean step by step guide!
π§Ή Step 1: Declutter & Initial Vacuum
Start by removing all rubbish and personal items. Take out floor mats, then vacuum the entire interiorβseats, carpets, under seats, and tight gaps using a crevice tool.
This is easier to do with a carpet spray to help brake and loosen dirt for initial vacuum.
βββββββββββββββββββββββββββββββββ
πͺ Step 2: Floor Mats Deep Clean
- Rubber mats: pressure wash + scrub with APC
- Carpet mats: shampoo, agitate, then rinse and extract
Leave them to dry fully before putting back.
βββββββββββββββββββββββββββββββββ
π§Ό Step 3: Dashboard, Plastics & Trim
Use an all-purpose cleaner (APC) with:
- Microfiber cloths
- Soft detailing brushes
Focus on vents, buttons, cup holders, and hard-to-reach areas.
βββββββββββββββββββββββββββββββββ
πͺ Step 4: Glass & Mirrors
Use a dedicated glass cleaner and a waffle weave or low-pile microfiber towel. Clean inside windows last to avoid overspray from earlier steps.
βββββββββββββββββββββββββββββββββ
π§΄ Step 5: Seats Deep Clean
Use:
- Fabric seats: shampoo + drill brush + extraction
- Leather seats: gentle cleaner + soft brush + microfiber
Work in sections and avoid over-soaking.
βββββββββββββββββββββββββββββββββ
π¨ Step 6: Carpets Extraction (Optional but Pro-Level)
For a true deep clean, use an extractor or wet vac to remove embedded dirt and stains from carpets and fabric surfaces.
βββββββββββββββββββββββββββββββββ
π¬οΈ Step 7: Odour Removal & Air Freshening
Use:
- Odour eliminator spray
- Cabin filter check/replacement (if needed)
Avoid overpowering scentsβaim for a clean, neutral smell.
βββββββββββββββββββββββββββββββββ
β¨ Step 8: Protect & Finish
Apply:
- Interior dressing (UV protection, satin finish)
- Leather conditioner (if applicable)
This restores the look and protects surfaces from fading and cracking.
βββββββββββββββββββββββββββββββββ
π Pro Tips
- Use multiple clean microfiber towels (donβt reuse dirty ones)
- Work top to bottom (dash β seats β carpets)
- Donβt soak electronics or buttons
- Always test products on a small area first