The CircuitWorks Lab Raspberry Pi course just got a BIG update! We've added several new lessons to help you go from setting up your Raspberry Pi to understanding how it actually connects to electronics. 🔥 NEW LESSONS NOW AVAILABLE: ⚡ STEP 3 — Installing Raspberry Pi OS Learn how to prepare your microSD card and install Raspberry Pi OS using Raspberry Pi Imager. ⚡ STEP 4 — First Boot & Initial Setup Power up your Pi, connect your peripherals, get online, update the system, and verify everything is working. ⚡ STEP 5 — Getting Comfortable with Raspberry Pi OS Explore Linux, the Terminal, files and directories, basic commands, installing software, and system information. ⚡ STEP 6 — GPIO: Connecting the Raspberry Pi to the Real World Learn about the 40-pin GPIO header, BCM numbering, 3.3V logic, power pins, I²C, SPI, UART, and the important safety rules before connecting electronics. And we're just getting started. 🔥 NEXT UP: 💡 STEP 7 — Controlling Your First LED with GPIO This is where we start taking what we've learned and connecting the Raspberry Pi to REAL hardware. If you're following the course, now is a great time to catch up through Step 6. 🥧 Raspberry Pi + Linux + Electronics That's where things start getting interesting. ⚡ CircuitWorks Lab BUILD • TEST • TROUBLESHOOT 👇👇👇👇 https://www.skool.com/circuitworks-lab-7388/classroom/fe550f2a?md=7e220e53ab4e4b1ca7452b085b92870c