Hey @Krish Chauhan . Is it not possible for you to record live meetings, so that nobody falls behind with the discussions made (no man left behind) ?

Hey everyone. If I were to 3D print a drone frame, which parts would be recommendable?

Hey everyone, I just dropped a keychain template you can use right away. All you have to do is CHANGE the name to yours in Fusion360 and export to your slicer. Great for quick prints, testing ideas, or easy custom products. Grab it in the resources section or down below👌 - Krish

Hey everyone, I’ve been getting questions on what kind of TPU people should use for their project so here’s a quick breakdown. - TPU 95A = standard flexible TPU (cases, grips). Can be stringy → print slower. - TPU 96A = a touch stiffer → usually prints a bit cleaner/easier (depends on brand). - AMS TPU (Bambu / AMS-friendly) = harder TPU made to feed in AMS. Normal soft TPU can buckle, so only use TPU that’s specifically labeled AMS-compatible. - Softer TPU (90A and under) = super rubbery, but hardest to print. Best for feet, seals, vibration damping. Hope this helps - Krish👍

Module 3 is in progress as well ✅ And because the majority here uses Bambu Lab, I’ll prioritize Bambu-specific workflows + troubleshooting first. Drop your printer model and what you want covered most: quality, speed, supports, filament, or calibration 👇